Using Diagnostic Options To Troubleshoot - Honeywell ACUIX Installation And Configuration Manual

Troubleshooting

Using Diagnostic Options to Troubleshoot

Task/Action (with Default)
Displaying Voltages
Select 7 Enhanced Features
The supply versus actual levels of the monitored power supplies are
displayed.
Clearing the Memory
Select 4 Diagnostic Options
cancel.
If you select Y, the message Extreme Caution: This will
delete all of the alarms, Presets, Preset Tours and
Sectors that are stored in memory displays.
Displaying the Total Run Time Counter
Select 4 Diagnostics Options
The screen shows the complete run time for Pan, Tilt, Zoom, Iris, and
Focus.
Displaying Error Logs and Running Diagnostics
1. Select 4 Diagnostics Options.
2. Select 1 Display Error Logs to view any error logs that have
occurred.
ENTER
3. Press to scroll through the error logs.
132

6 Display Supply Voltages.
 
3 Clear the Memory

2 Total Run Time (PTZ, Ir&Fo).
Notes
The dome monitors the 15V supply used
to operate the camera and the 3.3V
supply used to operate the PC boards.
Y or N to Clearing the memory does not clear the
language selection or programmed
privacy zones.
There are four pages of possible error
counts, including:
• Pan and Tilt diagnostics
• Homing
• Communication
• Reset counts
• Firmware upgrade