Displaying Dome Names; Displaying The Pan, Tilt, And Zoom Coordinates - Honeywell ACUIX User Manual

Configuring the OSD

Displaying Dome Names

Displaying the Pan, Tilt, and Zoom Coordinates

20
You can create a dome name and manage its on-screen display settings.
To create a dome name:
1. Select 2 Display Options
Name.
2. Enter a name for the dome (up to 24 alphanumeric characters) using the
controller joystick.
To show/hide a dome name:
• Select 2 Display Options

Name ON or OFF (default).
To change the location of the dome name on the screen:
1. Select 2 Display Options
Name Location.
2. Position the dome name on the screen by moving the controller joystick up
or down.
You can show the dome's pan (azimuth), tilt (elevation/declination), and zoom
coordinates on the screen.
To show/hide the pan and tilt coordinates:
• Select 4 Diagnostic Options

9 Dome Name Settings

9 Dome Name Settings

9 Dome Name Settings
 
1 Coordinates

1 Set Dome

2 Display Dome

3 Change Dome
ON or OFF (default).