Configuration; Opening And Displaying The Osd Camera Menu - Honeywell ACUIX Installation And Configuration Manual

Configuration

Opening and Displaying the OSD Camera Menu

Document 800-05662 Rev C
06/10
In this section:
• Opening and Displaying the OSD Camera
• Configuring Display Settings, page
• Configuring the Pan, Tilt and Zoom (PTZ) Dome
• Configuring the Image Quality and Video Display
• HDXG Cameras: Configuring Camera
• Configuring Contacts/Alarms, page
• Configuring the Controller Settings - Pan and Tilt
• Configuring the Lift and Gain Settings and
• Configuring Mimic Tours, page
• Configuring Default Functions: Presets and
• Configuring Presets and Preset
• Configuring Privacy Zones, page
• Configuring Sectors, page
Open the OSD by pressing 90
After each step it is assumed that you exit and save after each task using the applicable
method based on the protocol and controller.
Menu, page
75
Settings, page
Settings, page
Settings, page 86
91
Reverse, page
PWM, page
97
Tours, page
Tours, page 99
102
105

Preset.
5
73
78
80
95
96
98
73