Changing The Exposure Level; Changing The Max Agc Level; Changing The Chroma Level; Turning Backlight Comp On Or Off - Honeywell ACUIX Installation And Configuration Manual

Task/Action with Default (HDXG Camera Models Only)
OR, set 1 FNR Mode to Manual to set the FNR level from 0
(weak) to 16 (strong).

Changing the Exposure Level

1. Select 5 Camera Options
Level.
2. Enter a number between 0 and 255 where:
• 116 (default)
• 0 = dark
• 255 = bright

Changing the Max AGC Level

1. Select 5 Camera Options
Level.
2. Enter a number between 0 and 255 where:
• 216 (default)
• 0 = picture is dim with no noise
• 255 = picture is bright with noise

Changing the Chroma Level

1. Select 5 Camera Options
Level.
2. Enter a number between 0 and 255 where:
• 127 (default)
• 0 = no color
• 255 = color is saturated

Turning Backlight Comp ON or OFF

1. Ensure Auto Exposure mode is ON (Press 92
2. Ensure wide dynamic range (WDR) is OFF (default).
3. Select 5 Camera Options

Comp ON or OFF (default).
Document 800-05662 Rev C
06/10
ACUIX™ PTZ High Speed Analog Dome Installation and Configuration Guide
 
3 Video Setup 1 Exposure
 
3 Video Setup 2 Max AGC
 
3 Video Setup 3 Chroma

Preset).
 
3 Video Setup 4 Backlight
Notes
HDXG cameras only.
HDXG cameras only.
HDXG cameras only.
HDXG cameras only.
89