Configuring Camera Settings; Configuring Camera Conditions; Conditions; Figure 5-1 Camera Conditions - Honeywell Performance Series User Manual

Performance Series IP Camera Software Configuration Guide

5 Configuring Camera Settings

This chapter contains the following sections:
• Configuring Camera Conditions, page 22
• Configuring Video Settings, page 29
• Configuring Audio Settings, page 33

Configuring Camera Conditions

Go to Setup  Camera Setup  Conditions.
This section describes how to configure camera properties (picture, exposure, lighting
compensation, white balance, day and night, IR light, etc.).

Conditions

Go to Setup  Camera Setup  Conditions.
On the Conditions tab, you can view camera property information. The configurations
become valid immediately after they are saved.
The settings that are available on the Conditions tab may differ
Note depending on the selections made in the Profile Management
setup (see

Figure 5-1 Camera Conditions

22
Profile Management on page 26 for more information).