Configuring Pan Settings; Configuring The Ptz Movement Speed - Honeywell Performance HDZP252DI User Manual

Stopping a Running Pattern
Use the PTZ controls to move the camera in any direction, or click the Stop button located next
to the Start button to stop the pattern.

Configuring Pan Settings

You can set the PTZ to continuously pan around on its horizontal axis at a set speed.
Running a Pan
1.
2.
3.
4.

Configuring the PTZ Movement Speed

You can set the speed that the PTZ will move when manually controlled with the PTZ controls.

Navigate to Setup PTZ
Select the speed of the pan from the Speed bar, from 1 (slow) to 8 (fast).
Under the video screen, use the PTZ controls to move the image to the desired position to
start the pan from. The pan will continuously rotate around horizontally from the position
you set. Adjust the Zoom, Focus and Iris settings using the + and – buttons for each
setting, as required.
Click Start to start the pan function. When the pan is no longer needed, click Stop.
Figure 6-5 Pan Configuration Interface
Note You can also run a pan on the Live View page of the PTZ web client interface. See
PTZ Functions: Pan on page 26
 
Function Pan (see Figure
for more information.
PTZ Functions | 85
6-5).
800-22757 - A - 02/2017