System Administration and Equipment
Handling
Working with Passwords and PINs
Enabling the User or Privacy Zone Login PIN
Document 800-05662 Rev C
06/10
In this section:
•
Working with Passwords and
•
Restoring Default Settings or Resetting the Dome or
•
Resetting the Scan, Dome or
•
Changing Dome Address, Protocol, Parity or Baud
•
Sending Common Commands to all
•
Handling and Cleaning
Note
Even if the user or privacy zone login PIN is disabled, a password is still
required to enter the Admin Login/Password Settings menu.
1.
Ensure you have manual control of the dome.
2.
Press 75
Preset.
3.
Enter the 4-digit PIN. The default is 1000.
4.
Select 1 User Login PIN
PINs, page
107
Camera, page
110
Domes, page
Equipment, page
112
Enabled or Disabled (default).
6
Lens, page
109
Rate, page
110
111
107