Fujitsu PRIMERGY RX600 S3 Options Manual page 53

Accessible drives
Mounting the tape drive
Figure 37: Connecting the drive
Ê Connect the data cable (A) to the drive.
Ê Connect the power cable (B) to the drive.
Ê Connect the data cable either to the "SCSI B" connector on the system board
or to a free connector of a PCI-SCSI-Controller.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41640-J-Z156-2-76
A
chapter "Completion" on page
Options Guide RX600 S3
Installing a tape drive
B
69f.
53