4
Preparation
V
ATTENTION!
Make sure you observe the safety notes in the
on page
13ff.
Ê Exit all applications and shut down the server correctly.
Ê If your operating system has not switched off the server, press the On/Off
button.
Ê Unplug the power plugs from their sockets.
4.1
Opening the server
Figure 4: Removing the server
Ê Undo the knurled screws (1) and pull the server carefully out of the rack (2)
as far as possible.
Ê In the majority of cases it makes sense to remove the server from the rack.
I
How to remove the server from the rack is described in the operating
manual.
U41640-J-Z156-2-76
Options Guide RX600 S3
chapter "Important notes"
23