Fujitsu PRIMERGY RX600 S3 Options Manual page 28

Upgrading / exchanging main memory
2
Figure 9: Removing the memory board cover
Ê Remove the memory cover by pressing the marked clips. First press on clip
"1" and then clips "2" and "3".
Figure 10: Removing a memory module
Ê Flip the ejector tabs on each side of the slot outward (1). This levers an
installed memory module out of its slot.
Ê Remove the memory module from the slot (2).
28 Options Guide RX600 S3
3
1
U41640-J-Z156-2-76
Main memory