Fujitsu PRIMERGY RX600 S3 Options Manual page 43

Processors
Ê Carefully place the heat sink onto the processor.
I
Make sure the thermal paste on the underside of the heat sink is not
damaged.
Ê Fasten the heat sink with four screws (see
nally opposite screws, then the other two.
Ê Reinstall the processor cover (see
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41640-J-Z156-2-76
chapter "Completion" on page
Options Guide RX600 S3
Replacing the processor
page 35). First fasten two diago-
page 40).
69f.
43