Fujitsu PRIMERGY RX600 S3 Options Manual page 34

Installing additional processors
Installing the processor
Figure 15: Opening the socket lever
Ê Release the socket lever by pressing it sideways and lifting it up as far as it
will go.
Figure 16: Installing the processor
V
ATTENTION!
The processor can only be installed in one direction. Note the marking
on one of the corners (see diagram above).
To avoid damaging the pins or the processor, do not force the processor
into the socket.
Ê Position the new processor above the socket, and press it carefully into the
socket (1).
Ê Lock the processor into place in the socket by pushing the socket lever back
into its original position (2).
34 Options Guide RX600 S3
Processors
U41640-J-Z156-2-76