Fujitsu PRIMERGY RX600 S3 Options Manual page 63

External SCSI connection
Figure 43: Installing the connector in the server backplane
Ê Plug the plug (A) of the connection cable into the corresponding opening in
the backplane.
I
Make sure the plug engages properly.
Ê Connect the plug (B) of the connection cable (see
the "SCSI B" connector on the system board.
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
U41640-J-Z156-2-76
Installing an external SCSI connection
chapter "Completion" on page
Options Guide RX600 S3
A
figure 42 on page
69f.
62) to
63