Fujitsu PRIMERGY RX600 S3 Options Manual page 68

Installing the battery (BBU)
Figure 47: Attaching the connection cable to the system board
Ê Plug the connection cable to the connector "J1H1" on the system board (next
to the "SCSI B" connector).
I
The connector "J1H1" has a small plastic cover (A) which must be
removed first.
Ê Reinstall the memory boards or dummy memory boards in slots "C" and "D".
Ê Close the server, plug in the power plugs, and switch on the server as
described in the
68
chapter "Completion" on page
Options Guide RX600 S3
Battery for the RoMB controller
A
69f.
U41640-J-Z156-2-76