Power Management Setup - Nexcom MAXI 6560 User Manual

MAXI 6560 Series User's Guide

Power Management Setup

The Power management setup will appear on your screen like this:
Power Management
PM Control by APM
Video Off Method
Video Off After
MODEM Use IRQ
Doze Mode
Standby Mode
Suspend Mode
HDD Power Down
Throttle Duty Cycle
PCI/VGA Act-Monitor
IRQ 8 break Suspend
Power Management
This category allows you to select the type (or degree) of power saving and is
directly related to the following modes:
1. Doze Mode
2. Standby Mode
3. Suspend Mode
4. HDD Power Down
There are four selections for Power Management, three of which have fixed mode
settings.
BIOS Setup
ROM PCI/ISA BIOS (M6560_S-)
POWER MANAGEMENT SETUP
AWARD SOFTWARE, INC.
: Min Saving ** Reload Global Timer Event **
: Yes IRQ[3-7, 9-15], NMI
: V/H SYNC+Blank Primary IDE 0
: Standby Primary IDE 1
: 3 Secondary IDE 0
: Disabled Secondary IDE 1
: Disabled Floppy Disk
: Disabled Serial Port
: Disabled Parallel Port
: 62.5%
: Disabled
: Disabled
Esc : Quit
F1 : Help
F5 : Old Values
F6 : Load BIOS Defaults
F7 : Load Setup Defaults
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Disabled
: Enabled
: Disabled
↑ ↓ → ← : Select Item
PU/PD/+/-:Modify
(Shift) F2: Color
4- 17