Nexcom MAXI 6560 User Manual page 33

MAXI 6560 Series User's Guide
Drive A Type/Drive B Type
The category identifies the type of floppy disk drive A or drive B that has been
installed in the computer.
None
360K, 5.25 in
1.2M, 5.25 in
720K, 3.5 in
1.44M, 3.5 in
2.88M, 3.5 in
Floppy 3 Mode Support:
The category determines whether the floppy 3 mode support is enabled or not.
LCD&CRT:
On board VGA select display type.
Type
CRT
LCD
BOTH
AUTO
Error Halt On
The category determines whether the computer will stop or not if an error is detected
during power up.
No Errors
All Errors
All, but
Keyboard
All, but Diskette
All, but Disk/Key
BIOS Setup
No floppy drive installed
5-1/4 inch PC-type standard drive; 360 kilobyte capacity
5-1/4 inch AT-type high-density drive; 1.2 megabyte
capacity
3-1/2 inch double -sided drive; 720 kilobyte capacity
3-1/2 inch double -sided drive; 1.44 megabyte capacity
3-1/2 inch double -sided drive; 2.88 megabyte capacity
Function
Boot from CRT only
Boot on LCD only
Boot both LCD and CRT
Boot on CRT or LCD
Whenever the BIOS detects a non-fatal error the system
will be stopped and you will be prompted.
The system boot will not be stopped for any error that
may be detected.
The system boot will not stop for a keyboard error; it will
stop for all other errors.
The system boot will not stop for a disk error; it will stop
for all other errors.
The system boot will not stop for a keyboard or disk error;
it will stop for all other errors.
4- 8