Quick Power On Self Test; Boot Sequence - Nexcom MAXI 6560 User Manual

MAXI 6560 Series User's Guide
system and the following error message will appear, in the mean time, you can run an
anti-virus program to locate the problem.
! WARNING !
Disk boot sector is to be modified
Type "Y" to accept write or "N" to abort write
Award Software, Inc.
Enabled
Disabled
(Default)
N
ote: This function is available only for DOS and other OSes that do not trap INT13.
CPU Internal Cache/External Cache
These two categories speed up memory access.
CPU/chipset design. The default value is Enable. If your CPU without Internal
Cache then this item "CPU Internal Cache" will not be show.
Enabled (Default)
Disabled

Quick Power On Self Test

This category speeds up Power On Self Test (POST) after you power on the
computer. If it is set to Enable, BIOS will shorten or skip some check items
during POST.
Enabled
Disabled
(Default)
Boot From LAN First
This category specifies whether System Boot through the LAN Boot ROM. If not,
just disable it.
Enabled
Disabled
(Default)

Boot Sequence

BIOS Setup
Activates automatically when the system boots up causing a
warning message to appear when anything attempts to access
the boot sector or hard disk partition table.
No warning message to appear when anything attempts to access
the boot sector or hard disk partition table.
Enable cache
Disable cache
Enable quick POST
Normal POST
Boot from LAN
Not Boot from LAN
However, it depends on
4- 10