Power Management Setup - Nexcom EBC 572 Series User Manual

Parallel Port Mode
Select an operat ing mode for the onboard parallel (printer) port. There are four options: SPP (Standard
Parallel Port), EPP (Enhanced Parallel Port), ECP (Extended Capabilities Port) and ECP+EPP.
ECP Mode Use DMA
When the on-board parallel port is set to ECP mode, the parallel port can use DMA3 or DMA1.
After you have made your selections in the Integrated Peripherals setup, press the <ESC> key to go back
to the main program screen.

4.11 Power Management Setup

This option lets you c ontrol system power management. The sy stem has various power-saving modes
inc luding powering down the hard dis k, t urning off the video, suspending to RA M, and software power
down that allows the system to be automatically resumed by certain events.
The power-s aving modes can be c ontrolled by timeouts . If the system is inactive for a time, t he timeouts
begin counting. If the inactivity continues so that t he timeout period elapses, the syst em enters a power-
saving mode. If any item in the list of Reload Global Timer Events is enabled, then any activity on that item
will reset the timeout counters to zero.
If the system is suspended or has been powered down by software, it can be resumed by a wake up call
that is generated by incoming traffic to a modem, a LAN card, a PCI card, or a fixed alarm on the system
real-time clock.
EBC572 User' s Manual 47 Chapter 4