Table of Contents
Advertisement
MAXI 6560 Series User's Guide
The board installed is not responding to the ID request, or no board ID has been
found in the indicated slot.
NOTE:
When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
Slot Not Empty
Indicates that a slot designated as empty by the EISA Configuration Utility actually
contains a board.
NOTE: When this error appears, the system will boot in ISA mode, which allows
you to run the EISA Configuration Utility.
SYSTEM HALTED, (CTRL-ALT-DEL) TO REBOOT ...
Indicates the present boot attempt has been aborted and the system must be
rebooted. Press and hold down the CTRL and ALT keys and press DEL.
Wrong Board In Slot
PLEASE RUN EISA CONFIGURATION UTILITY
The board ID does not match the ID stored in the EISA non-volatile memory.
NOTE: When this error appears, the system will boot in ISA mode, which
allows you to run the EISA configuration utility.
BIOS Reference - POST Codes
Note: EISA POST codes are typically output to port address 300h.
ISA POST codes are output to port address 80h.
POST
Description
(hex)
BIOS Setup
4-
38
Advertisement
Table of Contents
