Pnp/Pci Configuration - Nexcom MAXI 6560 User Manual

MAXI 6560 Series User's Guide

PnP/PCI Configuration

This section describes configuring the PCI bus system. PCI, or Peripheral Component
Interconnect, is a system which allows I/O devices to operate at speeds nearing the
speed the CPU itself uses when communicating with its own special components. This
section covers some very technical items and it is strongly recommended that only
experienced users should make any changes to the default settings.
PNP OS Installed
Resources Controlled By : Manual
Reset Configuration Data : Disabled
IRQ-3 assigned to
IRQ-4 assigned to
IRQ-5 assigned to
IRQ-7 assigned to e
IRQ-9 assigned to
IRQ-10 assigned to
IRQ-11 assigned to
IRQ-12 assigned to
IRQ-14 assigned to
IRQ-15 assigned to
DMA-0 assigned to
DMA-1 assigned to
DMA-3 assigned to
DMA-5 assigned to
DMA-6 assigned to
BIOS Setup
ROM PCI/ISA BIOS (M6560_S-)
PNP/PCI SETUP
AWARD SOFTWARE, INC.
: No Slot 1 Use IRQ No.
Slot 2 Use IRQ No.
Slot 3 Use IRQ No.
Slot 4 Use IRQ No.
: PCI/ISA PnP
: PCI/ISA PnP Used MEM base addr
: PCI/ISA PnP Assign IRQ For USB
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP
: PCI/ISA PnP Esc : Quit
: PCI/ISA PnP F1 : Help
: PCI/ISA PnP F5 : Old Values
: PCI/ISA PnP F6 : Load BIOS Defaults
: Auto
: Auto
: Auto
: Auto
: N/A
: Enabled
↑ ↓ → ← : Select Item
PU/PD/+/-:Modify
(Shift) F2: Color
4- 21