Chapter 4. Award Bios Setup; Entering Setup - Nexcom MAXI 6560 User Manual

MAXI 6560 Series User's Guide
Chapter 4
AWARD BIOS Setup
Award's BIOS ROM has a built-in Setup program that allows users to modify the basic
system configuration. This type of information is stored in battery-backed RAM (CMOS
RAM) so that it retains the Setup information when the power is turned off.

Entering Setup

Power on the computer and press <Del> immediately will allow you to enter Setup. The
other way to enter Setup is to power on the computer, when the below message appears
briefly at the bottom of the screen during the POST (Power On Self Test), press <Del>
key or simultaneously press <Ctrl>, <Alt>, and <Esc> keys.
TO ENTER SETUP BEFORE BOOT PRESS <CTRL-ALT-ESC> OR <DEL> KEY
If the message disappears before you respond and you still wish to enter Setup, restart
the system to try again by turning it OFF then ON or pressing the "RESET" button on the
system case. You may also restart by simultaneously pressing <Ctrl>, <Alt>, and
<Delete> keys. If you do not press the keys at the correct time and the system does not
boot, an error message will be displayed and you will again be asked to,
PRESS <F1> TO CONTINUE, <CTRL-ALT-ESC> OR <DEL> TO ENTER SETUP
BIOS Setup 4- 1