Badjusting Black-And-White Setting (B/W) - Sanyo VDC-DP9584N - Network Camera Instruction Manual

Setting Camera Performance <CAMERA>
B Adjusting Black-and-White Setting (B/W)
1
Set <BURST> to "ON" or "OFF" for the burst
signal*.
·BURST
ON : Burst signal inserted into the Black-and-White image.
• Inserting the burst signal prevents the image distortion that may
occur when switching from Color to Black-and-White.
OFF : Burst signal not inserted into the Black-and-White image.
* The burst signals are color synchronization signals required for
reproducing color.
27
DAY/NIGHT SETTING
·BURST
OFF
PRESET
OFF
MENU BACK
2
Select <MENU> – "BACK" and press the SET
button.
RReturns to the camera performance screen.
■ If you want to close the settings screen
Set <MENU> to "END" and press the SET button.