Installation Procedures; Installing A Battery - Advantech MT-100 User Manual

2.2 Installation Procedures

2.2.1 Powering the Tablet PC by Battery Power
The MT-100 tablet PC is supplied with a powerful rechargeable battery. To
install and maintain the battery, or if it needs to be replaced, follow the instructions in
this section.
Caution!
Do not attempt to replace the battery with any others than the models
recommended and manufactured specifically for this tablet PC.
Note!
Before using MY-100 Tablet PC, please connect the adapter into MT-100 to charge the
battery and backup battery at least 24Hrs.

2.2.1.1 Installing a Battery

The battery is designed specifically for installation with the MT-100 tablet PC. It
fits exactly into the back of the PC and delivers precisely the exact voltage required to
power the unit. Under normal conditions, a fully charged battery will power the PC for up
to 3.5 hours. Normally, it requires 3.0 hours to fully charge a new battery.
To install or replace the battery pack:
1. Turn off the MT-100
2. Disconnect any peripheral devices from the MT-100.
3. Unfasten the two screws and pull back then can remove the battery.
4. Insert the new battery pack in the battery room.
14/61
Figure 2-7: Inserting the battery pack
MT-100 Tablet PC User Manual