2.2 Installation Procedures
2.2.1 Connecting the power cord
The POC-S155 could only be powered by a DC power adapter (SINPRO
Model no.MPU50-108). Be sure to always handle the power cords by
holding the plug ends only.
Follow these procedures in order:
1. Connect the female end of the power adapter to the DC jack of the
panel PC. (See Figure 2-3.)
2. Connect the female end of the power cord to the DC power adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
3. After finish all above installation, please jump to section 2.2.2 and con-
tinue your installation procedure
2.2.2 Connecting the keyboard and mouse
1. Connect the Y-shaped adapter to the PS/2 mouse and keyboard port on
the I/O section of the POC-S155. (See Figure 2-4.)
2. Connect the PS/2 mouse and keyboard to the Y-shaped adapter. (See
Figure 2-4.)
POC-S155 User Manual
Figure 2.3: Connecting the power cord
10