2.2
Installation Procedures
2.2.1
Connecting the Power Cord
POC-W213L can only be powered by a DC power adapter (FSP Model no.FSP084-
DIBAN2). Be sure to always handle power cords by holding the plug ends only.
Follow these procedures in order:
1.
Connect the female end of the power adapter to the DC jack of the panel PC
(see Figure 2.4)
2.
Connect the female end of the power cord to the DC power adapter
3.
Connect the 3-pin male plug of the power cord to an electrical outlet.
Warning! The POC-W213L SERIES is supplied by a 84 watt power supply and a
special.
Figure 2.3 Rear view of Multi I/O ports
Figure 2.4 Connecting the power cord
9
POC-W213L Series User Manual