2.2 Installation Procedures
2.2.1 Connecting the Power Cord
This product only supports DC power (12 VDC, max. 60 W). Be sure to hold the plug
end when plugging or unplugging the power cord.
2.2.2 Connecting the Mouse and Keyboard
Connect the mouse and keyboard via the USB ports located in the I/O section at the
rear of the computer.
2.2.3 Activating the Power Source
Verify that the power cord is connected to the power input port of the device. Then
connect the plug end of the power cord to the wall power outlet.
Figure 2.3 IO Connectors of UPOS-211
7
UPOS-211 User Manual