Advantech MT-100 User Manual page 17

2.2.3 Connecting the power cord for CRADLE
Be sure to always handle the power cords by holding the plug ends only.
Follow these procedures in order:
1. Connect the female end of the AC Adapter cord to the DC Power inlet of the CRADLE.
(See Figure 2-6.)
2. Connect the female end of the power cord to the AC inlet of the AC Adapter
3. Connect the 3-pin male plug of the power cord to an electrical outlet.
4. Open the power switch on AC Adapter.
Power Switch
of AC adapter
Figure 2-6: Connecting the AC Adapter power supplier with CRADLE
17/61 MT-100 Tablet PC User Manual