Table of Contents
Advertisement
2.2
Installation Procedures
2.2.1
Connecting the power cord
The POC-127 could only be powered by a DC power adapter (SINPRO Model
no.MPU63-107 or HPU100-107). Be sure to always handle the power cords by hold-
ing the plug ends only.
Follow these procedures in order:
1.
Connect the female end of the power adapter to the DC jack of the panel PC.
(See Figure 2-7.)
2.
Connect the female end of the power cord to the DC power adapter.
3.
Connect the 3-pin male plug of the power cord to an electrical outlet.
2.2.2
Connecting the Ground pin
Step
1.Find the Equipotential Terminal on rear side of POC. An Equipotential Termi-
nal is provided to optionally connect to a hospital ground/earth system
Figure 2.6 Connecting the power cord
Figure 2.7 POC-127 Equipotential Terminal Pin
11
Equipment
Terminal
POC-127 User Manual
Advertisement
Table of Contents
