7.3. Smart Card reader driver installation
7.3.1 General Information of Smart card reader
•
Full speed interface to PC with simple command structure
•
Support most of the popular memory card types in the market:
Cards following the I2C bus protocol (free memory cards) such as:
o
Atmel: AT24C01 / 02 / 04 / 08 / 16 / 32 / 64 / 128 / 256 / 512 /
1024
SGS-Thomson: ST14C02C, ST14C04C
Gemplus: GFM1K, GFM2K, GFM4K, GFM8K
SLE4432/4442/5542 intelligent 256 bytes EEPROM with write
o
protect function: SLE4432, SLE4442, SLE5542
SLE4418/4428 intelligent 1K bytes EEPROM with write-protect
o
function: SLE4418, SLE4428
•
Short Circuit Protection
•
Certificate of conformance: EN 60950/IEC 60950, ISO-7816, PC/SC, CE,
FCC, Microsoft WHQL, EMV 2000 Level 1certified
7.3.2 Install Smart card reader driver
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
Note1
The CD-ROM drive is designated as "D" throughout this chapter.
Note2
<Enter> means pressing the "Enter" key on the keyboard.
58/61
MT-100 Tablet PC User Manual