3.4 Installation of Audio Driver
Complete the following steps to install the Audio driver. Follow the procedures in the flow chart that
apply to the operating system that you are using within your MT-100.
Important
The following windows illustrations are examples only. You must follow the flow
chart instructions and pay attention to the instructions which appear on your
screen.
Note1
The CD-ROM drive is designated as "D" throughout this chapter.
Note2
<Enter> means pressing the "Enter" key on the keyboard.
Step 1-1 Click the 'Start' button in the task bar, click 'Control Panel', click 'System' then show a
dialogue windows of System Properties. Then Click the 'Hardware', Click 'Device Manager' then
appear the 'Device manager' dialog.
36/61
MT-100 Tablet PC User Manual