2.2.5 Separating with CRADLE
1. The Switch must on "Right side" and Button push down (see table 2-1 & Figure 2-9.)
2. The Tablet PC can vertical takeoff CRADLE .
Switch
Button
Left side
Right side
High
Always lock
lock
Low
Always un-lock
un-lock
Table 2-1: The selection of Lock of CRADLE
Remark: If the switch on the left side then Button mode can't be changed so Always Lock or
Always un-lock. You must change the switch to right side then can change the Button mode.
Notice: "Always un-lock" and "un-lock" can't guaranty the connection quality with
CRADLE. Meaning is the CRADLE I/O ports can't workable if no good connection.
Button
Switch
Right Side
Left Side
Figure 2-9: Top down view of CRADLE
2.2.6 Switching on the power
Switch on the power switch on the left side. Press the power switch button over 0.5 sec then
can power on the system.
20/61
MT-100 Tablet PC User Manual