Chapter 7 Mt-Cradle Drivers Installation - Advantech MT-100 User Manual

Chapter 7 MT-CRADLE drivers installation

7.1 Introduction
7.1.1 General Information
MT-CRADLE is MT-100 tablet PC series option Docking station. It is include multi I/O port for
more application. These I/O port include USB x 4 ports, RS-232 Port x1, Gigabit LAN port x1,
VGA port and Smart Card Reader. We must install drivers for these add on I/O ports then by be
1. The CRADLE must be fixed on VESA mount(75mmx75mm) first.
2. Connect the female end of the AC Adapter cord to the DC Power inlet of the CRADLE.
3. The Tablet PC must vertical landing to CRADLE (See Figure 7-1.)
4. The button on up of CRADLE down and switch off then Tablet PC can vertical takeoff
CRADLE .
Figure 7-1: Combining with CRADLE
53/61 MT-100 Tablet PC User Manual