Hardware Installations and Upgrades
Installing and Removing the Intel
Installing the Intel
1. Disconnect the front USB cable from the server board (see letter A).
2. Remove the screws (see letter B).
3. Slide out the hard drive cage assembly from server chassis (see letter C).
4. Remove the two screws (see letter D).
5. Slide out the bracket from server chassis together with cables (see letter E).
6. Remove the two screws and slide out the front USB connecter from the bracket (see letter
F).
7. Install the front USB connecter to the Intel
screws (see letter G).
8. Connect the xxxmm LCP cable to the LCP board and install the Intel
bracket into server chassis together with cables (see letter H).
44
®
Local Control Panel
Figure 69. Removing the bracket
®
Local Control Panel
®
Local Control Panel bracket and secure the two
®
Intel
Server System R2000SC Service Guide
®
Local Control Panel