Using Hot Dial; Making And Receiving Calls; Switching Between Two Calls; Ending Calls - Inter-Tel SoftPhone 8601 User Manual

Using Hot Dial

The Model 8601 supports the Hot Dial feature. When Hot Dial is enabled (
endpoint automatically sends the dialed number if the number matches the dial plan.
If Hot Dial is disabled (
To turn on/off the Hot Dial feature: Tap the Hot Dial icon. The icon changes to
reflect the current setting.

Making and Receiving Calls

Making and receiving calls is the basic purpose of any endpoint. With your Model
8601, you can make/receive intercom and outside calls, and make emergency calls.
Making Calls
To place an intercom call: Enter an extension number on the dialpad or type the
number directly on the soft keyboard.
To place an outgoing call: Tap
the outside number on the dialpad or type the number directly on the soft keyboard.
To make an emergency call: Tap
To call an attendant: Tap
Receiving Calls
When the Model 8601 receives a call, you hear a ring sound, and the endpoint dis-
plays an incoming call notification.
To answer a call: Tap
icon appears when the notification message is minimized)
To ignore a call: Tap

Switching Between Two Calls

The Model 8601 can establish up to two simultaneous calls. If the second incoming
call is answered, the first call is placed on hold, and you are connected with the sec-
ond caller. The Model 8601 then presents a
you to toggle back and forth between calls.
To switch between calls: Tap

Ending Calls

While you are on a call, the END icon appears on the display.
To end a call: Tap END.
18
), you must tap
TALK
(the feature code for outgoing access) followed by
8
9 1 1
.
0
from the notify message or tap
ANSWER
from the notify message.
IGNORE
.
SWAP
Inter-Tel
to send the number.
.
.
button on the display that allows
SWAP
®
Model 8601 SoftPhone for Pocket PC User Guide
), the
(the TALK
TALK