Maintenance Procedures; Hot Swapping Faulty Modules - Inter-Tel ECX 2000 Installation & Maintenance Manual

EncoreCX
Installation and Maintenance Manual

Maintenance procedures

Faults can be rectified on-site by replacing faulty modules or PCBs (Printed Circuit Boards).

Hot swapping faulty modules

The CO Line modules can be replaced without powering the system down.
·
The CO Line modules can be removed and replaced without powering down the system.
·
The Extension modules can be removed and replaced without powering down the system.
·
The Voice module can be removed and replaced without powering down the system.
When a Voice module is replaced, all recorded messages and greetings are lost. If a
Voice module is removed and reinserted, the messages and greetings are retained.
·
The Internet Router module can be removed and replaced without powering down the system.
·
The T1 (future development) module can be removed and replaced without powering down the system.
45