Preparing For Installation; Safety Warnings; Site Requirements; Catalyst 6880-X Switch Hardware Installation Guide - Cisco Catalyst 6880-X Hardware Installation Manual

Preparing for Installation

•
•
•
•
•

Safety Warnings

Safety warnings appear throughout this publication in procedures that might harm you if performed incorrectly.
The warnings below are general warnings that are applicable to the entire publication.
Warning Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
Warning This unit is intended for installation in restricted access areas. A restricted access area can be accessed
only through the use of a special tool, lock and key, or other means of security. Statement 1017
Warning Read the installation instructions before connecting the system to the power source. Statement 1004

Site Requirements

Planning a proper location for the switch and layout of the equipment rack or wiring closet is essential for
successful system operation. These sections describe some of the basic site requirements that you should be
aware of as you prepare to install your switch, including the following:
• Environmental factors can adversely affect the performance and longevity of your system.
OL-30827-02
Safety Warnings, page 17
Site Requirements, page 17
Power Requirements, page 27
Cabling Requirements, page 29
Site Preparation Checklist, page 29
2
C H A P T E R

Catalyst 6880-X Switch Hardware Installation Guide

17