Preparing For Installation; Safety Warnings - Cisco Catalyst 9500 Series Hardware Installation Manual

Preparing for Installation

•
•

Safety Warnings

Warning
Warning
Warning
Warning
Warning
Warning
Safety Warnings, on page 15
Site Requirements, on page 16
Read the installation instructions before using, installing, or connecting the system to the power source.
Statement 1004
Class 1 laser product. Statement 1008
This unit is intended for installation in restricted access areas. A restricted access area can be accessed
by skilled, instructed or qualified personnel. Statement 1017
This unit might have more than one power supply connection. All connections must be removed to
de-energize the unit. Statement 1028
Only trained and qualified personnel should be allowed to install, replace, or service this equipment.
Statement 1030
To prevent personal injury or damage to the chassis, never attempt to lift or tilt the chassis using the
handles on modules (such as power supplies, fans, or cards); these types of handles are not designed to
support the weight of the unit. Statement 1032
C H A P T E R
Cisco Catalyst 9500X Series Switches Hardware Installation Guide
3
15