Appendix C Repacking The Switch - Cisco Catalyst 6880-X Hardware Installation Manual

Repacking the Switch
If you need to return or move the Catalyst 6880-X switch chassis, follow these steps to repack the switch
using the original packaging material.
Procedure
Step 1 Set the chassis in the bottom pallet.
Figure 64: Packing Material
Step 2 Place the packing bag over the chassis.
Step 3 Place the front-packing material and power supply packing material around the chassis.
Step 4 Place the power supplies in the spaces provided in the power supply packing material.
Step 5
Place the top-packing material over the top of the chassis and power supplies.
Step 6 Place the rack-mount kit and the accessory kit on the top-packing material.
Note
OL-30827-02
You must include the accessory kit for the final packaging to fit properly.
C
A P P E N D I X
Catalyst 6880-X Switch Hardware Installation Guide
101