Cisco Catalyst 6880-X Hardware Installation Manual page 81

Installing the Modular Port Card
Step 3 Use the bale-release latch side of the tool to lift the bale up, and remove the SFP or SFP+ module.
Figure 33: Removing the SFP Module from the Port Card
Step 4 Grasp the SFP or SFP+ transceiver module, and carefully remove it from the slot.
Step 5
Place the SFP or SFP+ transceiver module in an antistatic bag or other protective environment.
OL-30827-02
Removing SFP or SFP+ Modules from the Modular Port Card
Catalyst 6880-X Switch Hardware Installation Guide
69