Preparing for Installation
Task No.
5
6
For power receptacles (depends on power supply), verify that each power supply installed in the chassis
Note
has a dedicated AC source or DC source circuit.
Note
For UPS for power failures, refer to the power supply's kVA rating as a sizing criteria in determining the
output required by the UPS.
OL-30827-02
Activity
Cable and interface equipment
evaluation:
• Cable type
• Connector type
• Cable distance limitations
• Interface equipment
(transceivers)
EMI evaluation:
• Distance limitations for
signaling
• Site wiring
• RFI levels
Site Preparation Checklist
Verified By
Catalyst 6880-X Switch Hardware Installation Guide
Time and Date
31