Table of Contents
Advertisement
5. Web-based Router Setting
Starting Web Management
The following shows how to start up the Web Management of the Industrial
Router. Note the Industrial Router is configured through an Ethernet connection.
Please make sure the manager PC must be set to the same IP subnet address.
For example, the default IP address of the Industrial Router is 192.168.1.1, then
the manager PC should be set to 192.168.1.x (where x is a number between 1
and 254, except 100) and the default subnet mask is 255.255.255.0.
Industrial Router
IP Address: 192.168.1.1
Logging in to the Industrial Router
1. Use Internet Explorer 8.0 or above Web browser and enter IP address
http://192.168.1.1 to access the Web interface.
2. When the following dialog box appears, please enter "admin" in both the
default user name and password fields. The login screen in Figure 5-2 appears.
Default IP Address: 192.168.1.1
Default Username: admin
Default Password: admin
RJ45/UTP Cable
Figure 5-1: IP Management Diagram
Figure 5-2: Web Login Screen
PC / Workstation
with Web Browser
192.168.1.x
11
Advertisement
Table of Contents
