Table of Contents
Advertisement
Disabled
Authentication is disabled and no password/key is required to connect to the access point.
Authentication is disabled and no password/key is required to connect to the access point.
Authentication is disabled and no password/key is required to connect to the access point.
WEP
WEP (Wired Equivalent Privacy) is a
Equivalent Privacy) is a basic encryption. For a higher level of security consider using
encryption.
The security mode includes the following settings:
The security mode includes the following settings
Object
• Security Mode
• Auth Type
• Input Type
• Key Length
• Default Key
Figure
Figure 4-31 Security Settings – WEP
Description
Description
Select WEP from the drop-down list to configure the wireless network
Select
using WEP encryption method.
using WEP encryption method.
Select Open System or Shared.
Select Open System or Shared.
Select an input type of Hex or ASCII.
Select an input type of Hex or ASCII.
Level of WEP encryption is applied to all WEP keys.
Level of WEP encryption
Select a 64-/128-/152-bit password length.
Select a 64
40/64-bit: enter 10 hexadecimal digits (any combination of 0
enter 10 hexadecimal digits (any combination of 0-9, a-f,
A-F and null key is not permitted) or 5 ASCII characters.
F and null key is not permitted) or 5 ASCII characters.
104/128-bit: enter 26 hexadecimal digits (any combination of
a-f, A-F and null key is not permitted) or 13 ASCII characters.
128/152-bit: enter 32 hexadecimal digits (any combination of 0
a-f, A-F and null key is not permitted) or 16 ASCII characters.
Select 1 – 4 to specify which of the four WEP keys the device
Select 1
default.
default.
-52-
User Manual of WAP
WAP-500N/WBS-500N
level of security consider using the WPA
configure the wireless network
applied to all WEP keys.
hexadecimal digits (any combination of 0-9,
ASCII characters.
hexadecimal digits (any combination of 0-9,
ASCII characters.
WEP keys the device uses as its
Advertisement
Table of Contents
