Security; Snmp; Supervisor Password And Id - Planet G.SHDSL Bridge/Router GRT-402 User Manual

PLANET Technology Corp.
profile table however users who have the supervisor password can change the
configuration of GRT series. Move the cursor " >> " to user and press enter
key.
>> clear
modify
list
You can delete the user by number using clear command. If you do not make
sure the number of user, you can use list command to check it. Modify
command is to modify an old user information or add a new user to user
profile.

3.5.2 Security

Security command can be configured ten legal IP address for telnet access
and port number.
Move the cursor " >> " to security and press enter. The default legal address
is 0.0.0.0. It means that there is no restriction of IP to access GRT series via
telnet.
>> port
ip_pool
list

3.5.3 SNMP

Simple Network Management Protocol (SNMP) is the protocol not only
governing network management, but also the monitoring of network devices
and their functions. GRT series can generate SNMP traps to indicate alarm
conditions, and it relies on SNMP community strings to implement SNMP
security. This router support MIB II.
Move the cursor " >> " to snmp and press enter.
>> community
trap

3.5.4 Supervisor Password and ID

The supervisor password and ID are the last door for security but the most
important. Users who access GRT series via web browser, console port or
telnet have to use the ID and password to configure GRT series. Suggest to
change the ID and password.
Clear user profile
Modify the user profile
List the user profile
Configure telent TCP port
Legal address IP address pool
Show security profile
Configure community parameter
Configure trap host parameter
GRT-101/401/402 User's Manual
- - 43