Security; Storm Control; Global Setting - Planet GS-4210-16T2S User Manual

4.9 Security

This section is to control the access of the Managed Switch, including the user access and management control.
The Security Page contains links to the following main topics:

Strom Control

802.1x

DHCP Snooping

Dynamic ARP Inspection

IP Source Guard

Port Security

DoS

AAA

TACACS+ Server

Radius Server

Access

4.9.1 Storm Control

Storm control for the switch is configured on this Page.
There is an unknown unicast storm rate control, unknown multicast storm rate control, and a broadcast storm rate control.
These only affect flooded frames, i.e. frames with a (VLAN ID, DMAC) pair not present on the MAC Address table.

4.9.1.1 Global Setting

The Storm Control Global Setting and Information screens in
The page includes the following fields:
Object
• Unit
• Preamble & IFG
User's Manual of GS-4210-16T2S_24T2S_16P2S_24P2S_48T4S
Figure 4-9-1: Storm Control Global Setting Page Screenshot
Description
Controls the unit of measure for the storm control rate as "pps" or "bps". The
default value is "bps".
Set the excluded or included interframe gap
Figure 4-9-1 and Figure 4-9-2
243
appear.