Problems And Remedies; Stain, Diagonal Line, Pressing Mark And Uncut Of The Sheets - MyBinding Standard APC45 Programmable Instruction Manual

5-2 Problems and Remedies

5-2-1 Stain, Diagonal Line, Pressing Mark and Uncut of the Sheets

Problem
Sheets are
cut diago-
nally.
Diagonal
line
appears on
the cut sur-
face.
Cut sheets
has press-
ing mark.
Cut sheets
are stained
by grease.
40
Causes and Remedies
Knife
Sheet
Sheets
Diagonal Line on
the Cut Surface
Pressing Mark
Section likely
to be stained
• The sheets may not hit the back-
gauge. (Make sure that the
sheets hit the backgauge.)
• There may be air between the
sheets. (Press the sheets to
remove air before cutting opera-
tion.)
• The knife may be dull. (The
replacement of the knife is nec-
essary.)
• The knife is worn or damaged.
(The replacement of the knife is
necessary.)
• The clamp pressure is too strong
for the sheets, or the support
plate is not attached. (Attach the
support plate on the clamp.)
• Excess grease may be filled.
WARNING
Turn off the power switch
before the operation.
Otherwise, sharp knife
can cause severe per-
sonal injury.
(Wipe the filled grease at cutting
section.)
See
For the
Knife
Replace-
ment,
Service
Call
For the
Knife
Replace-
ment,
Service
Call
-
-