Function Cutting - MyBinding Standard APC45 Programmable Instruction Manual

3-4 Function Cutting

This section explains how to recall the cut-
ting job performed most frequently using
the function keys M1 through M3.
Three programs can be saved. Call the ser-
vice representatives of your local dealer.
Write down your own program value for your reference.
M1
M2
M3
The following steps explain the function
cutting using the
Example:
M3 :
1 :2 09 .0
Press the
M3
keys.
- The program saved in
backgauge moves to the position of the step 1
and the machine becomes ready to be oper-
ated.
Guide Window
M 3
1:209.0
Step 1
20
key.
M3
2 :2 9 6 .0 3 : 29 5 . 0
key of the function
M3
is recalled. The
1 / 3
2:296.0
Step 2
WARNING
This machine must be operated by just one
person at a time.
CAUTION
Do not cut anything besides paper. This
may damage the machine.
Place the sheets.
- The maximum cutting height is 60 mm (2.36").
- Arrange the sheets by aligning them with the
backgauge and side guide.
Do not pile the narrow sheets high.
Place the sheets on the other side so that
the clamp does not incline widely.