MyBinding Standard APC45 Programmable Instruction Manual page 33

3-6 Creating a Cutting Program (Input)
Input the cutting length for the last
step.
Ent
- Press the key while the value is "0" in
step 14.
After the value for the last
step 13 is input,
COURSE14 14 / 0
13 : 90.0 14 : 0
Press the
value is "0" to complete the
program.
Save the program.
Ent
- Press the key on the confirmation
screen below and finish creating the program.
- The program cutting mode starts and the LED
on the button is illuminated.
When the
while the input value is 0,
EXIT?
Y : "Ent" N : "C"
When the
MEMORIZE?
Y : "Ent" N : "C"
When the
1/13
COURSE14
1:320.0 2:280.0
The program of the course
number 14 starts.
The value for
the step 14 is
ready to be
input.
Ent
key while the
Ent
key is pressed
The exit confirmation
screen appears.
Ent
key is pressed,
The memory
confirmation screen
appears.
Ent
key is pressed,
25