MyBinding Standard APC45 Programmable Instruction Manual page 36

3-6 Creating a Cutting Program (Delete)
This section explains how to delete the
saved program.
Example: When deleting course number 5.
COURSE : 5
2:260
[Deleting the Saved Program]
Press the
- The LED on the upper left of the program
memory button is illuminated and shows that
the "program memory" is selected.
- "SELECT COURSE (1-30)" appears in the
guide window.
LED
SELECT COURSE ( 1-30 )
Input the course number to delete.
- In this step, for example, input the course
number 5.
5 Ent
- Press the
keypad. The step 1 of the course number 5
appears on the guide window as shown
below.
Input the course number 5.
COURSE : 5
1:420.0
28
3 /10
3:249.5
button.
The course
number can
1
be input.
keys on the numeric
1 /10
Press the 0 key and the
the numeric keypad.
- "EXIT?" appears in the guide window.
When the
after "0" is input,
EXIT?
Y : "Ent" N : "C"
Press the key.
Ent
- "MEMORIZE?" appears in the guide window.
When the
the memory confirma-
MEMORIZE?
tion screen appears.
Y : "Ent" N : "C"
Press the key.
Ent
- "NO MEMORY" appears in the guide window.
This is the end of the procedure for deleting
the program.
When the
the program is deleted.
COURSE : 5
NO MEMORY
key on
Ent
Ent
key is pressed
The exit confirmation
screen appears.
Ent
key is pressed,
Ent
key is pressed,