Safety Checks; Check The Power Switch - MyBinding Standard APC45 Programmable Instruction Manual

This chapter explains how to check the safety functions before
starting the cutting operation.

2-1 Check the Power Switch

This machine has been designed to be as
safe as possible. However, if an accident
occurs, it can cause severe personal
injury. Before using the machine, always
perform the safety checks listed in this
chapter.
WARNING
If you notice a problem while making the
safety checks, do not try to correct the
problem by yourself. If the machine is not
working correctly, it may cause severe per-
sonal injury. Please notify your local
dealer.
Turn on the power switch.
- When the power switch is turned on, the
screen shown to the upper right appears.

2. Safety Checks

Power Switch
ON
OFF
Guide Window
(1)
Horizon APC-45
VX.XX
(2)
Horizon APC-45
. . .
LOADING
(3)
REPLACE KNIFE
PRESS "Ent"
• If the knife replacement is not
necessary, press the
Ent
key.
• When pressing the
this message does not appear
until the cutting operation has
been done for another 1,000
When the
times.
C
or
When pressing the
this message appears when turn-
Ent
ing on the power switch again.
key is
See "3-8 Knife Replacement
pressed,
Message" for details.
(4)
400.0mm
(1) Initial Screen:
When the power switch is turned on.
(2) Initializing Backgauge:
The backgauge moves to the home position
(400 mm [17.00"]).
(3) Knife Replacement Message:
(Only when the knife cuts sheets over 2,000 times.)
(4) Initializing Backgauge Completed:
The backgauge reaches the home position.
ROM Version
appears.
C
or
C
key,
Ent
key,
check that this
screen
appears.
5