I Memory Programming - Icom IC-R5 Instruction Manual

5. Receive mode selection
➥ Push [MODE•SCAN] several
times to select the desired re-
ceive mode.
• FM, WFM and AM are available.

I Memory programming

The IC-R5 has a total of 1250 memory channels (including
200 auto write channels and 50 scan edges) for storing often
used receive frequency, mode, etc.
1. Setting frequency
In VFO mode, set the desired receive frequency mode.
• When "
lect the VFO mode.
[MODE•SCAN]
2. Selecting a memory
channel
Push [V/M•S.MW•~] for 1 sec.,
then rotate [DIAL] to select the
desired memory channel.
• " " indicator and memory
channel number blink.
3. Writing a memory channel
Push [V/M•S.MW•~] for 1 sec. until 3 beeps sound.
• Memory channel number automatically increases when continuing
to push [V/M•S.MW•~] after programming.
QUICK REFERENCE GUIDE
" indicator is displayed, push [V/M•S.MW•~] to se-
[DIAL]
[V/M•S.MW•~]
IV